Denford motors

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
terry1956
Posts: 12
Joined: Tue 07 Sep , 2021 10:21 am
Hardware/Software: Denford 2600 router

Denford motors

Post by terry1956 » Sun 10 Oct , 2021 15:36 pm

Hi, I am trying to convert a Denford 2600 router to machine 3. I am now at the motor tuning position. All the motors are original bar the z axis motor. My problem is that the X and Y motors are not sounding too happy once set to move the correct distance. My feeling is that the micro step setting on the drivers are wrong. Can anyone please let me know the correct micro step setting for these motors. Thanks.

Post Reply