Micromill

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
terry1956
Posts: 6
Joined: Tue 07 Sep , 2021 10:21 am
Hardware/Software: Denford 2600 router

Micromill

Post by terry1956 » Mon 13 Sep , 2021 18:02 pm

Hi, can anyone please help me out. I need to know which wires are for the Mills axis motors. Can anyone please I’d the board and give me a link to a drawing or I’d the correct wires thanks. The mill runs off pathpilot, and that is the board on the far left of the picture.
Attachments
DA4178E5-C6EE-417B-ADFA-4B80CE44A72F.jpeg
DA4178E5-C6EE-417B-ADFA-4B80CE44A72F.jpeg (1006.84 KiB) Viewed 32 times

Post Reply