Never seen one of these before, not in Denford livery anyhow.
Up for grabs on ebay - https://cgi.ebay.co.uk/Senior-Junior-Mil ... 4aabdfeb9c
I'll get round to scanning the Denford drawings for it one day....
Andy
Denford Senior Junior mill
Moderators: Martin, Steve, Mr Magoo
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Denford Senior Junior mill
- Attachments
-
- Senior Junior Mill
- Senior junior Mill.jpg (31.62 KiB) Viewed 16270 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Denford Senior Junior mill
A thousand pound bid and still 8 days to go !?!? They must be good 
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Denford Senior Junior mill
It looks to be in hardly-used condition, includes the vertical knuckle head attachment (which can sell on their own for around £300) and it's single phase.
So you get a small footprint machine with the rigidity of the bigger M1's - I don't think you'd find a new machine of that spec and quality for anywhere near that money!
Andy
So you get a small footprint machine with the rigidity of the bigger M1's - I don't think you'd find a new machine of that spec and quality for anywhere near that money!
Andy
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Denford Senior Junior mill
Sold for £1550!!