Denford Senior 250 machine parameters

Any info relating to Tom Senior mills and lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
SAnwar
Posts: 1
Joined: Wed 27 Apr , 2011 10:11 am

Denford Senior 250 machine parameters

Post by SAnwar » Wed 27 Apr , 2011 12:54 pm

Hi Cnc Guro,
Sir i have a machine of Denford Senior 250 cnc lathe but i got loss machine parameter please guide me about.

Thank you.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Denford Senior 250 machine parameters

Post by Denford Admin » Wed 27 Apr , 2011 16:52 pm

Hopefully one of these will match your machine:
viewtopic.php?f=53&t=3304
Top
Bakes144
Posts: 11
Joined: Tue 13 Nov , 2012 9:02 am

Re: Denford Senior 250 machine parameters

Post by Bakes144 » Sat 08 Jun , 2013 10:02 am

Hi there, I have a Denford Senior 200 CNC lathe and I'm wondering if it is possible to fit a tailstock to it? It seems strange that such a large machine does not have one. I have considered making my own to get me by... It seems that these machines are few ' far between & I can't find much information on them!

Thanks,
Paul
Top
Post Reply

Return to “Senior (Tom)”