Gibo has been running his machine quite happily until a week ago when it lost all its memory.
We have reloaded all system parameters OK.
I have gone through the ladder diagram supplied in the manual and found the 400 series diagnostic parameters, but we do not have a list or description of them, I think there may also be some timers to set in the 300 range?
Does anyone have a listing and is it possible to get a digital display? Fanuc parameter 19 bit 7 does not appear to have an effect.
His machine is serial number 8075555 with a FANUC 0M B.
Zerocentre Diagnostic Parameters
Any information regarding the Denford ZeroCentre ZeroTurn ZeroBore Fanuc CNC machines
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 3
- Joined: Mon 01 Feb , 2010 10:36 am
Return to “ZeroCentre/ZeroTurn/ZeroBore”
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures