zero centre machine manuals wanted

Any information regarding the Denford ZeroCentre ZeroTurn ZeroBore Fanuc CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
stev0436
Posts: 1
Joined: Wed 25 May , 2011 16:09 pm

zero centre machine manuals wanted

Post by stev0436 » Wed 25 May , 2011 16:57 pm

I am looking to purchase a Denford Zero milling machine does anyone have a machine and programming manual
steve

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: zero centre machine manuals wanted

Post by Triac whizz » Sun 29 May , 2011 17:15 pm

You know the where-abouts of one? I've only ever seen it in Denfords brochures! show some pictures

Manuals - look at Fanuc that's what controls it, standard industy stuff with very little memory by todays standards
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: zero centre machine manuals wanted

Post by angel-tech » Sun 29 May , 2011 19:32 pm


User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: zero centre machine manuals wanted

Post by Triac whizz » Sun 29 May , 2011 21:15 pm

well, b*gg*r me! they exist :lolol:

Tool change is a bit slow but I'll swop one for my triac :)

How many were made?
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: zero centre machine manuals wanted

Post by angel-tech » Sun 29 May , 2011 21:25 pm

i was tempted

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: zero centre machine manuals wanted

Post by Denford Admin » Tue 31 May , 2011 9:32 am

How many were made?
14 !
viewtopic.php?f=52&t=3346
I bet that was no. 12

Post Reply