Page 1 of 1
Mill Machine ATC Spares
Posted: Mon 08 May , 2006 12:52 pm
by innovaw
I have a Denford Zerocentre.
I require Spares of the spring clips which hold the toolholders into the Tool Changer Carousel.
Can anybody help?
Posted: Tue 09 May , 2006 7:43 am
by bradders
Unfortunalety we can no longer supply spare parts for this machine
Posted: Tue 09 May , 2006 8:55 am
by Denford Admin
Bradders is right - we have had a look for the springs, but only have spares for our Triac tool changers.
The machine (and toolchanger) was imported by us from Taiwan, where we then fitted a Fanuc 0M B(?) control and drives system.
As it happens the agent we used is still in business
Luke Chen
http://www.promach.com
Its worth a try contacting him.