User Manual

All info relating to the Denford VMC1300 and VMC1300 Pro CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
mtrehy
Posts: 7
Joined: Wed 02 Feb , 2022 20:24 pm
Hardware/Software: Novamill, Microrouter & Novaturn

User Manual

Post by mtrehy » Wed 06 Apr , 2022 20:20 pm

Hi,

Is there a user manual available? Particularly one that covers machines without auto tool change?

Can't find one on the website

Thanks

mtrehy
Posts: 7
Joined: Wed 02 Feb , 2022 20:24 pm
Hardware/Software: Novamill, Microrouter & Novaturn

Re: User Manual

Post by mtrehy » Wed 06 Apr , 2022 21:33 pm

I found a manual online but it doesn't cover a couple of questions I have....

The machine has a blue tank on the back. I assume this is mist coolant as it also has an air inlet. Is there a separate manual for the mist coolant? I assume it uses the same air as the tool change? Is there a certain pressure?

The machine doesn't have tool change fitted but does have the button for doing a manual change - would this suggest that it was supplied with tool changer but someone has removed it? Again, does the air pressure matter much?

Thanks

Post Reply