VMC 1300 TOOL CHANGER

All info relating to the Denford VMC1300 and VMC1300 Pro CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
tractorman
Posts: 10
Joined: Tue 27 Oct , 2009 13:30 pm

VMC 1300 TOOL CHANGER

Post by tractorman » Thu 22 Nov , 2012 14:48 pm

Hi
Have a VMC 1300 and the tool changer has indexed round so that it is between tools, using M32 OR M33 cannot get it to index 1/2 way to reset.
Any solutions or have I missed something
Thank you
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: VMC 1300 TOOL CHANGER

Post by Denford Admin » Thu 22 Nov , 2012 15:26 pm

M34 is carousel half turn
Top
tractorman
Posts: 10
Joined: Tue 27 Oct , 2009 13:30 pm

Re: VMC 1300 TOOL CHANGER

Post by tractorman » Thu 22 Nov , 2012 15:44 pm

Thank you
Will do that tonight
Thanks
Martin
Top
Post Reply

Return to “VMC 1300”