Gearbox gears

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
bikerwookie
Posts: 18
Joined: Mon 18 Feb , 2008 14:46 pm

Gearbox gears

Post by bikerwookie » Wed 27 Jul , 2022 15:40 pm

Hi I am after two gears from a 280vs gearbox. Does anyone know if there is a lathe being broken for spares anywhere? One is the 16t of the 2nd shaft from the bottom the other is the one that is moved by the rotary gear selector via the rack.
Thanks in advance.
Attachments
70F85DFC-C4B3-4194-ADBF-6E4FF33F6FE2.jpeg
70F85DFC-C4B3-4194-ADBF-6E4FF33F6FE2.jpeg (916.38 KiB) Viewed 4357 times
4877BC74-A4BD-4AE7-9E2E-3B7AA86BEAEC.jpeg
4877BC74-A4BD-4AE7-9E2E-3B7AA86BEAEC.jpeg (536.22 KiB) Viewed 4357 times

bikerwookie
Posts: 18
Joined: Mon 18 Feb , 2008 14:46 pm

Re: Gearbox gears

Post by bikerwookie » Thu 28 Jul , 2022 8:41 am

So below are the two drawings for the two gears I need. Anybody know someone who can make these please? Any ideas on cost?
Attachments
3470BD8C-710F-4811-98F6-B6918607F65A.png
3470BD8C-710F-4811-98F6-B6918607F65A.png (1.03 MiB) Viewed 4345 times
D982D0A0-4976-45D2-8823-7B3FBB32EE2A.png
D982D0A0-4976-45D2-8823-7B3FBB32EE2A.png (897.4 KiB) Viewed 4345 times

User avatar
dazz
CNC Expert
CNC Expert
Posts: 243
Joined: Sat 19 Aug , 2006 11:31 am
Hardware/Software: Viceroy TDS 1/1GB lathe, Imperial, stripped down and rebuilt.
Viceroy Taper/Tracer attachment, Shop made cross slide tracer attachment, VSD.
Location: New Zealand

Re: Gearbox gears

Post by dazz » Thu 10 Nov , 2022 10:19 am

Hi
Try asking your local model engineering club.
Regards

Dazz

bikerwookie
Posts: 18
Joined: Mon 18 Feb , 2008 14:46 pm

Re: Gearbox gears

Post by bikerwookie » Thu 10 Nov , 2022 10:56 am

Thanks Dazz

I sorted it in the end bought two gears with enough material on them to machine the specifics from the drawing.

bikerwookie
Posts: 18
Joined: Mon 18 Feb , 2008 14:46 pm

Re: Gearbox gears

Post by bikerwookie » Thu 10 Nov , 2022 10:56 am

Thanks Dazz

I sorted it in the end bought two gears with enough material on them to machine the specifics from the drawing.

Post Reply