Apron Gear Rack

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Fiddler
Posts: 18
Joined: Tue 28 Jul , 2020 9:43 am

Apron Gear Rack

Post by Fiddler » Fri 04 Sep , 2020 20:58 pm

Does anybody have a drawing of ML100/403A ? I have looked a few times through the lists of drawings but not come across anything with full detail of it. This is for the Viceroy Screwcutting lathe.

Thanks

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Apron Gear Rack

Post by Andy B » Sun 06 Sep , 2020 7:16 am

I've added the 2 rack drawings (standard and long bed versions) here - http://www.denfordata.com/bb/viewtopic. ... 120#p24120

Andy

Fiddler
Posts: 18
Joined: Tue 28 Jul , 2020 9:43 am

Re: Apron Gear Rack

Post by Fiddler » Sun 06 Sep , 2020 17:47 pm

Thanks very much Andy :!:

Post Reply