New kid with TDS3 CM&WL

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Greenfellers
Posts: 6
Joined: Fri 17 Jul , 2020 11:12 am

New kid with TDS3 CM&WL

Post by Greenfellers » Fri 17 Jul , 2020 13:31 pm

Hi all, new on here. I have a model of the subj lathe which came from a school to me via one of the Faberge family and my dad. It's in reasonable shape and largely original except for a single phase motor and t-slotted cross slide.

I am contemplating the addition of an ELS set up in order to extend its usability (for me). This would probably require coolant. Can anyone point me in the direction of a dimensioned drawing for part ML124 (a or b) Splash Guard?

Having trawled through the available documents I cannot find one.

Thanks in advance,

Andy

rpwilson
CNC Expert
CNC Expert
Posts: 155
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: New kid with TDS3 CM&WL

Post by rpwilson » Fri 17 Jul , 2020 14:33 pm

Sorry to be ignorant, but what is ELS?

Greenfellers
Posts: 6
Joined: Fri 17 Jul , 2020 11:12 am

Re: New kid with TDS3 CM&WL

Post by Greenfellers » Fri 17 Jul , 2020 14:57 pm

Electronic Lead Screw. Part automation but not full CNC.

Regards,

Andy

Post Reply