280 VICEROY SYNCHRO STUD GER

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Sinbad
Posts: 4
Joined: Wed 30 Oct , 2019 17:11 pm
Hardware/Software: none

280 VICEROY SYNCHRO STUD GER

Post by Sinbad » Wed 30 Oct , 2019 17:26 pm

I have recently acquired a 280 Syncro (1984) with the 8 position imperial gearbox but know very little about it. The stud gear is 16T, which seems too small (the quadrant bracket is at the extreme end of the slot and fouls the cabinet door) Looking at the drawings I suspect it should be 24T, can anybody verify this?
Thanks in advance
Mike Price

Post Reply