Page 1 of 1
280vs lubrication.
Posted: Tue 23 Jun , 2015 21:22 pm
by Gareth Johnston
Hello everyone , im new to lathe work and the viceroy 280vs , im looking to know what everyone uses for oil in gearbox and saddle. Also for the greasing/oil nipples what do people use. Thanks
Re: 280vs lubrication.
Posted: Tue 23 Jun , 2015 23:19 pm
by Pete.
I use ISO32 hydraulic oil in the headstock and gearbox on mine. On the ways I use way lube and in the oilers I use mineral engine oil.
Re: 280vs lubrication.
Posted: Wed 24 Jun , 2015 14:29 pm
by Gareth Johnston
Okay thanks Pete.
Re: 280vs lubrication.
Posted: Sat 27 Jun , 2015 10:15 am
by dazz
Hello
Hydraulic oil is a good choice for the gearbox. It's only available in 10litres drums here so I use non-EP gear oil.
EP lubricates erode yellow metals. I am about 99% certain that gearbox does not contain any bronze.
The gearbox is so lightly loaded that just about any lubricant would be OK and there would be no advantage using EP oil.
I use heavy oil for the ways. I don't use coolant so I don't have to worry about oil washing off.
I routinely wipe down the ways and apply fresh oil.