my new lathe an old viceroy

[jeff1137]

I am new & this is my first post.

I live in Manchester UK, I love motorbikes,
I was a millwright, Crane Eng, Pipefitter & Welder. Now 62 years old & a bad back.

Now the good stuff, I have got an old lathe, a Denford Viceroy Mk 2 T.D.S.1/1. serial No 28506
with 2off 3 jaw chucks, 1 off 4 jaw chuck, 4 face plates, full complement of change gears,
3 Kingston Aloris wedge quick change tool posts & other tools.

It is in a less than new condition, the back gear selector lever is missing & the cross
travel nut also missing, it has now become a project, but for £300 it is not a lot of money.

I hope to do some posts, for you to see the progress over the next 6 months.
Any info will be gratefully received

Thanks Jeff

[jeff1137]

Hi
The viceroy lathe arrived today, some photo of the lathe.
Now I have had a good look at it, it is not that bad.

[jeff1137]

Hi
as any one got a back gear selector lever, for a viceroy tds 1/1 lathe, for sale.
if you have one please let me know.
jeff

[Pete.]

Nice buy Jeff, £300 is a great price given all the bits you got with it.

Seems to me that making a back gear lever would be a great first job for the lathe...

[paulmo101]

Hi

I agree with Pete thats a good price for the lathe and bits & Bobs.

These guys sometimes have viceroys in for breaking but I`m not sure what they`ve got a the moment.

http://www.gandmtools.co.uk/cat_branch.php?sub=4

I suppose a lever would not be too difficult to make if you cant source one?

All the best

Paul

[jeff1137]

Hi
Thanks for the info, I have sent out 10 or so emails looking for parts,
G & M tools is one of them, but the ones that have replied have not
got any parts in that I am looking for.

Still looking for a Thread Dial Indicator & Back Gear Selector Lever. ?????????????

I have ordered some tool holders for the Aloris tool post AXA No 2 XL
They will take 5/8” tool.

Got them from the USA, 4 off for £60, In the UK would be £80.

I am looking for a Digital Phase converter unit, for the 900w 1.2 hp
3 PHs motor.

Several of the manufacturers I have never heard of & I would be
Grateful for any info, if anyone has one or used one at work let
Me know.
IMO, TECO, OPTIDRIVE, MITSUBISHI, HYUNDAI-ELECTRIC.

The chuck came off ok, no problem & I used my S shaped spanners
For the first time in 10 years on the motor, but it would not have
Come off with out them.

Thanks Jeff

[paulmo101]

Hi Jeff

There was a chap on this forum that was making some TDI`s for the viceroy but I cant seem to find any threads relating to that topic. I think he lived Warrington Area and I had a extra gear wheel for my TDI off him - his work looked really good.
Maybes omebody else can jump in with the members name - in the mean time I will keep searching.

Good luck

Paul

[paulmo101]

Hi Jeff

Just found the thread I was looking for in classifieds

viewtopic.php?f=13&t=2028

Half way down the first page look for a post by "molyneux.mike"

I believe he has also made some custom gear sizes for thread cutting.

He may be able to help with the back gear lever?

I think he is a talented machinist.

Cheers

Paul

[jeff1137]

Hi
Is it molyneux.mike, i have sent a PM to him, but he has not been on the site for a long time, no posts ??????
hope he get the PM i sent.

jeff

[jeff1137]

Hi
no reply from mike, any one know how to get hold of him ??????????????????????????

[LesT]

Hi,
i don't know how to get hold of Mike Molyneux, sorry.
Regarding an Inverter, I have a TECO model from Drives direct. Seems to work OK.
You must have a motor that can be connected star though.
I wouldn't be to hung up on the design of the backgear handle, if you can make one just now, you might be able to get a Proper one in the future.
I have attached a couple of Pics of the one on my Lathe, which is an older model than yours. It is held on by a grubscrew and has a detent arrangement to keep it in a selected gear.
Les.T

[jeff1137]

Hi Les
Sorry for not getting back to you, thanks for the info will make one if I cannot find one, but would like
an original if possible.

Does anyone know the year of manufacture, the serial No is 28506 & there is a 86 marked on the gearbox.

I have removed the motor 3 Ph 900w 1.2 Hp, tested out OK.

Strip off the top of the lathe, cleaned out the gibs & slides,
full of sawdust & a resin of some sort, it must be from the wood ????????,
the parts look v/good under the crap, cleaning up very nice.

I will do more as I get the time & put on some photos of the parts that have been take off & cleaned.

[jeff1137]

Hi
I was looking at a WEG CFW-08 VFD 2.2 Kw IP65 for £263+vat
Is WEG any good

thanks jeff

[paulmo101]

Hi

Drives direct at Nottingham supply a lot of inverters and I believe they are quite Good to deal.
They are on ebay a lot and here is a link http://www.ebay.co.uk/itm/HP-MOTOR-1HP- ... 9253wt_958

Although you may not want the motor package.

If you contact them they will be able to give you some advice.

Cheers

Paul

[jeff1137]

Hi

Drives direct at Nottingham supply a lot of inverters and I believe they are quite Good to deal.
They are on ebay a lot and here is a link http://www.ebay.co.uk/itm/HP-MOTOR-1HP- ... 9253wt_958

Although you may not want the motor package.

If you contact them they will be able to give you some advice.

Cheers

Paul

Hi paul
I looked at Drives Direct but for a IP65 it would cost over £400 & i
think it was made in China, & only IP20.

The WEG is 2.2 Kw, & includes Vector control, soft start, IP66,
speed control 0/400 Hz & a lot more, made in Brazil. RRP £543 + VAT
I got it from Inverter Drives Supermarket for £263 + VAT

Ringing round for a price i rang Transwave, Peter Moss was the there,
he was great, full of info, was open & honest, if is price
was lower, i would have got one from him, great guy.

[LesT]

I just thought I would comment because I think you may have a few misconceptions.
Firstly you don't need a 2HP motor to drive a viceroy, unless you are going to do very heavy work.
1 HP (746 watts) is fine.
Even if the motor is a 2.2Kw motor you can drive it with a 1HP Inverter.
It will work fine but will reach a current/power limit if you overload it.
You don't need an IP65 or 66 Inverter unless you intend to hose out your workshop.
The one I have is IP20, but I made a little enclosure out of Plywood for it to live in,
you could us a proper enclosure if you wanted. It keeps the dust/metal fragments out.
Here is a link to an explanation of IP Ratings (Simplified)

http://www.euroboxenclosures.co.uk/IP-R ... lained.php

Also stay away from old fashioned phase converters,
a modern Inverter gives you speed control and the ability to reverse as well.

Cheers,

Les.T.

[jeff1137]

Hi Les
Thanks yes i no, but i will get a bigger lathe at some point & i will have my VFD.

It is going outside in a garage it will be damp & I do a lot of welding & grinding in the garage.
dust/metal fragments & damp are the killers of VFD.
2 or 3 have stated that a IP65 would be the best way to go, to fit a box & filter to a IP20 would cost
More than buying a IP65, this is a IP66 for a very good price.

A lot of the IP20 in that price range are from China, ok, but not the best. This is a mid-range VFD

A lot of the info came from Peter Moss from Transwave, who provided some good advice in a unbiased
Way, He did say that a 1Hp or 1.5Hp would do & he had IP20 at that price, but IP65 are hard to find at a
low price. I did not get the VFD from him, is price was too expensive, over £150 more.

I had not heard of WEG previously & needed someone who had. So the post.

Hopefully I have a VFD for the next 10 years or so.

Thank you for the advice, it is all ways welcome.

jeff

[jeff1137]

Hi all
I got a Thread Dial Indicator & Back Gear Selector Lever off ebay, so my lathe is complete.
Will start the set up this year.

Back Gear Lever 1.jpg (595.03 KiB) Viewed 13554 times

This photo is of ebay

tdi 1.jpg (328.19 KiB) Viewed 13554 times

[dazz]

Hi

I am part way through replacing a 1 phase motor with a VFD/3phase motor. This has included a new motor mount and poly-vee pulley arrangement.
Progress can be seen at this link.
http://www.youtube.com/watch?v=KJG5ohpvsVU

Looks like your lathe will come up nicely with just a good clean.

[jeff1137]

Hi dazz
I will program the VFD presently, how long did you give the motor to slow down & stop & run up,
did you fit a brake to the VFD.

What size motor did you fit.

Did you first fit a DC motor to the lathe

I have a 900w motor 3ph, have you had any prolemes runing at 1800 rpm, my motor is old maybe 15-25 years ???