Page 1 of 1
Viceroy tailstock taper size
Posted: Thu 12 Aug , 2010 15:45 pm
by bradders
Customer writes .................
I need to identify my Denford machine and the size of the morse taper in the tailstock
Re: Viceroy tailstock taper size
Posted: Fri 13 Aug , 2010 8:32 am
by bikerwookie
It looks like a viceroy 280 vs with an mt3 tailstock.
Re: Viceroy tailstock taper size
Posted: Fri 13 Aug , 2010 8:48 am
by bradders
Cheers BikerWookie,
Customer --- MT3 = Morse Taper No 3
Re: Viceroy tailstock taper size
Posted: Fri 13 Aug , 2010 9:53 am
by Andy B
A fairly early model 280VS too - it has the nice chromed ball-handles on the top- and cross-slides and dual-scale dials.
Had a bit of a hard life by the looks of it - missing various levers for the power feed & screwcutting.
Andy
Re: Viceroy tailstock taper size
Posted: Fri 13 Aug , 2010 9:59 am
by bradders
Andy,
I'm glad you can offer such detailed information on the lathe