Viceroy TDS 1 lathe mounting holes

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Gemini
Posts: 4
Joined: Mon 09 Jun , 2008 16:30 pm
Location: Nottinghamshire

Viceroy TDS 1 lathe mounting holes

Post by Gemini » Tue 10 Jun , 2008 0:53 am

Hi, could anyone explain why these holes are threaded please :? the 4 ive circled and 2 at the tailstock end, is there some sort of special bolt for them :?:

Image
Ian
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1436
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 10 Jun , 2008 4:49 am

Can you supply any further photos?

It would also help if you explained why you are asking the question?

I dont Know the answer but with more info I am sure we will be able to help you..
Top
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Post by Andy B » Tue 10 Jun , 2008 7:45 am

I can't see the picture for some reason - but on my 280 the machine is mounted using studs, so I suspect that practise was carried over from the 5" machines.

Andy
Top
Gemini
Posts: 4
Joined: Mon 09 Jun , 2008 16:30 pm
Location: Nottinghamshire

Post by Gemini » Wed 11 Jun , 2008 0:28 am

Andy B wrote:I can't see the picture for some reason - but on my 280 the machine is mounted using studs, so I suspect that practise was carried over from the 5" machines.

Andy
Hi Andy, it is mounted using studs, but these are a smaller diameter than the holes, so i didnt know if something was missing with the holes being threaded, 2 of the studs had snapped one in the tail stock mounting and 1 in the headstock mounting, i just need to find out the size so i can replace them
Ian
Top
Post Reply

Return to “Viceroy”