Flattening stone on sharpedge

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Steve, Mr Magoo, Martin, bradders, Andy B

Post Reply
alan.bain
Posts: 1
Joined: Mon 08 Aug , 2022 9:26 am
Hardware/Software: Sharpedge 16

Flattening stone on sharpedge

Post by alan.bain » Thu 22 Sep , 2022 9:23 am

Is there a recommended method for flattening a rather glazed stone on a Viceroy sharpedge. The problem isn't grooves in the stone but that the surface goes up and down as it goes round (in the fashion of a warped LP record). On the high speed tool and cutter grinder I'd true off the surface with a diamond but I'm not sure what one does on the sharpedge.

Alan

Post Reply