Viceroy T.D.S. 1/1 GB Tailstock

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Seank226
Posts: 1
Joined: Thu 29 Jun , 2017 23:03 pm

Viceroy T.D.S. 1/1 GB Tailstock

Post by Seank226 » Wed 06 Feb , 2019 3:36 am

Hello everyone, I am looking for a viceroy MK1 T.D.S. 1/1 GB lathe tailstock, any idea as to where I might find one ? And at what cost ? Thanks
Top
rpwilson
CNC Expert
CNC Expert
Posts: 156
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: Viceroy T.D.S. 1/1 GB Tailstock

Post by rpwilson » Sun 10 Feb , 2019 13:03 pm

If you don't get a reply on here, and this site isn't much used these days I'm afraid, compared to 2 or 3 years ago, then Ebay is your friend.
You could try a wanted ad on www.homeworkshop.org, which is free, or on www.lathes.co.uk for which there is a charge.

Richard
Top
Post Reply

Return to “Viceroy”