Another Viceroy 280 in glasgow

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
LesT
CNC Expert
CNC Expert
Posts: 119
Joined: Wed 11 Aug , 2010 14:17 pm
Hardware/Software: An old Viceroy with a half installed invertor drive,(when I can decide where to put the control pushbuttons I will wire it up properly)
A WMD25V mini mill.
Tractor, Bobcat 320, and Dumper truck.
7 sheds, about 5 (?) mowers. etc, etc.
Location: Scotland !

Another Viceroy 280 in glasgow

Post by LesT » Fri 25 Jul , 2014 13:17 pm

I see that Sweeney Kincaid have another Viceroy 280 for auction.
Its here:
https://www.sweeney-kincaid.com/Sales/Li ... l=1&auto=0#

Les.T.
PS If you want to bid don't forget that buyers premium and VAT adds about 30% to the final price.

LesT
CNC Expert
CNC Expert
Posts: 119
Joined: Wed 11 Aug , 2010 14:17 pm
Hardware/Software: An old Viceroy with a half installed invertor drive,(when I can decide where to put the control pushbuttons I will wire it up properly)
A WMD25V mini mill.
Tractor, Bobcat 320, and Dumper truck.
7 sheds, about 5 (?) mowers. etc, etc.
Location: Scotland !

Re: Another Viceroy 280 in glasgow

Post by LesT » Thu 31 Jul , 2014 16:23 pm

Sold: Price was 552 pounds in total.(if my Maths is right)
That seems pretty good assuming there isn't much wrong with it.

rpwilson
CNC Expert
CNC Expert
Posts: 156
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: Another Viceroy 280 in glasgow

Post by rpwilson » Thu 31 Jul , 2014 17:26 pm

LesT wrote:Sold: Price was 552 pounds in total.(if my Maths is right)
That seems pretty good assuming there isn't much wrong with it.
Does the £552 include the premium etc?. Also, I suppose, depends on how much kit there was with it in the way of chucks, faceplate, steadies, apart from the one chuck shown in the photo.

Richard

LesT
CNC Expert
CNC Expert
Posts: 119
Joined: Wed 11 Aug , 2010 14:17 pm
Hardware/Software: An old Viceroy with a half installed invertor drive,(when I can decide where to put the control pushbuttons I will wire it up properly)
A WMD25V mini mill.
Tractor, Bobcat 320, and Dumper truck.
7 sheds, about 5 (?) mowers. etc, etc.
Location: Scotland !

Re: Another Viceroy 280 in glasgow

Post by LesT » Fri 01 Aug , 2014 15:14 pm

Hi,

I think that's the total price, (if I got my maths right, etc, etc),
I don't see anything else much with it,
Might be a treasure trove in the cupboard!

Les.T.

Post Reply