Versalaser software / drivers v1.28.5

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Versalaser software / drivers v1.28.5

Post by Denford Admin » Fri 26 Jan , 2007 16:56 pm

Download the latest version of the VersaLaser software / drivers here:
V1.28.5

For a first time installation use this:
https://www.denfordata.com/downloads/vl- ... 1-28-5.zip

To upgrade from previous versions use this:
https://www.denfordata.com/downloads/vl- ... 1-28-5.zip

Upgrade instructions:
1) Unzip the upgrade file into a temporary directory on your PC.
2) Close all programs.
3) Close the VersaLASER software by right-clicking on the Image icon in your taskbar and left-clicking EXIT.
4) From Windows Explorer, run the upgrade.exe file by double-clicking on it.
5) Re-boot your computer.
Last edited by Denford Admin on Fri 26 Jan , 2007 17:08 pm, edited 1 time in total.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Fri 26 Jan , 2007 16:57 pm

About v1.28.5..

This is an important driver update that fixes some material settings for twill and paper.

This version also ensures operation with the latest windows security patches and updates.
Top
Post Reply

Return to “VersaLaser”