VLS 6.60 - Dust Extraction

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
paddymcs
Posts: 1
Joined: Tue 03 Dec , 2013 20:32 pm
Hardware/Software: VLS6.6
2D laser CAM

VLS 6.60 - Dust Extraction

Post by paddymcs » Tue 03 Dec , 2013 20:39 pm

Hi folks

Im new to using this machine and am struggling with cutting 6mm MDF

Every so often there is a message coming up - "Dust Extraction aborted by user" and we are having to run the programs over and over to get parts made for coursework.

Obviously we havent done anything special with the dust extraction hence our perplexion.

We are using an Advantage Laser fume extraction

From installation we havent been able to increase or decrease the fan speed and are assuning this has something to do with it.

Any help guidance would be most gratefully received

Paddy

Post Reply