Denford Software & Machines

Posted: **Wed 06 Jun , 2007 14:08 pm**

This is the procedure to reinstall new VLS software over old VLS software

1. Unplug the USB cable from the Laser
2. Uninstall the old VLS Versa Laser Software
3. Install the new VLS Versa Laser Software
4. Uninstall the new VLS Versa Laser Software
5. Reinstall the new VLS Versa Laser Software
6. Reconnect the USB cable

Posted: **Fri 22 Jun , 2007 9:43 am**

Note - ignore this for VL laser drivers / machines
VLS is the NEW series of laser

Posted: **Fri 22 Jun , 2007 16:54 pm**

THIS ONLY HAS TO BE DONE IF YOUR DRIVER IS PRIOR TO 2.12.12

THE VERY EARLY DRIVER LEFT FILES INSTALLED THAT WERE NOT REMOVED BY THE UPGRADE.

Denford Software & Machines

Reinstall new VLS software over old VLS software

Reinstall new VLS software over old VLS software