Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford
Moderators: Martin, Steve, Mr Magoo
-
Crakkers
- CNC Apprentice
- Posts: 35
- Joined: Fri 01 Dec , 2006 16:35 pm
Post
by Crakkers » Tue 02 Oct , 2007 12:24 pm
Hi
Installed versa laser on standalone PC. everytime I switch PC on it states new hardware found and looks for firmware. Laser extraction is constantly switched on - noisy! but can not control machine via PC.
Please advise exactly what software I need to download. Original disks are lost!!!
Op system is XP
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
-
Contact:
Post
by bradders » Tue 02 Oct , 2007 14:49 pm
-
Crakkers
- CNC Apprentice
- Posts: 35
- Joined: Fri 01 Dec , 2006 16:35 pm
Post
by Crakkers » Tue 02 Oct , 2007 20:58 pm
does not answer the question.
why does new hardware found come on everytime I boot PC up, even though software has been installed and reinstalled many times, as per your instructions?
-
Martin
- CNC Guru
- Posts: 1916
- Joined: Fri 24 Feb , 2006 17:09 pm
- Location: Brighouse
Post
by Martin » Wed 03 Oct , 2007 19:52 pm
It sounds like you have a problem on one of the USB devices.
Try looking at the USB devices in device manager & check that they are all installed correctly. If one shows a error then try to update the device.
-
Steve
- CNC Guru
- Posts: 1451
- Joined: Tue 21 Feb , 2006 16:15 pm
- Location: Denford UK
Post
by Steve » Thu 04 Oct , 2007 9:01 am
It is probably somthing to do with access rights on the computer.
Have you tried logging on as an administrator then loading the laser drivers. It may be as a standard user the changes you are making each time are not being saved.
-
ULS Service
- Posts: 17
- Joined: Tue 24 Apr , 2007 4:13 am
Post
by ULS Service » Thu 04 Oct , 2007 10:50 am
it looks like the usb board from your pc, does search it every time, because otheriwse there will be no reason, why it alswys shows you that a new device was found.
Maybe try to connectg the machine to another usb board on your pc or try to upgrade your usb board drivers.
regards
Bernhard
best regards
Bernhard
