G91 on Turn 270 PRO

All info relating to the Denford Turn270 and NewTurn270 CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
hgranhus
Posts: 1
Joined: Thu 17 Feb , 2022 10:41 am
Hardware/Software: Denford Turn 270 Pro
QuickTURN 2D Design
VR Turning

G91 on Turn 270 PRO

Post by hgranhus » Thu 17 Feb , 2022 10:46 am

I am trying to use som incremental progamming on my Turn 270 Pro.
When i use it it says: 91 : Error in code, Value is invalid.

I am using VR Turning software.

Is there any workaround?

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: G91 on Turn 270 PRO

Post by Steve » Mon 21 Feb , 2022 14:50 pm

Unfortunatly G91 is not supported in VR Turning.
The supported codes are listed in the help.

g codes.JPG
g codes.JPG (190.48 KiB) Viewed 3966 times

Post Reply