270 pro. is stopping mid cycle

All info relating to the Denford Turn270 and NewTurn270 CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Graeme
Posts: 23
Joined: Thu 01 Nov , 2012 22:48 pm
Hardware/Software: denford

270 pro. is stopping mid cycle

Post by Graeme » Tue 19 Nov , 2013 19:22 pm

Hi, I'm having a problem with my machine which had been getting steadily worse over the last month or so; it now stops after the first G00 instruction, everytime, which means that the machine can't be used in audio mode. However, it works fine in manual mode. Hope you can help! Thanks, Graeme.

Post Reply