Triac 8 station ATC parts and information

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Triac 8 station ATC parts and information

Post by Denford Admin » Fri 20 Jul , 2012 9:59 am

Our part number: MCV2/711 Tool Holder Roller - 2 required per tool holder - £18.00 each
TR3/728A Tool Holder Spring - 1 required per tool holder - £8.00 each

The BT30 holder plate is detailed in this drawing:
MCV2_0710-triac-toolholder-bt30.pdf
(54.35 KiB) Downloaded 1601 times
The 8 station aluminiun disk is detailed here:
TR3_0765-triac-8-station-turret-disk.pdf
(88.13 KiB) Downloaded 1483 times
Top
Post Reply

Return to “Triac”