Which computer & connecting cable etc can I use on Triac ?.

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
sopysnipe01
Posts: 16
Joined: Wed 10 Feb , 2010 15:45 pm

Which computer & connecting cable etc can I use on Triac ?.

Post by sopysnipe01 » Thu 11 Feb , 2010 16:10 pm

Hi
I have bought an old Triac cnc mill "the model with the tape player on the front", can any one please tell me what type of computer I can conect to it, & what type of cable would I need ?, so that I can obtain some suitable software to write the programmes away from the machine.
Also Does anyone know if the data tapes are still available ?.
Cheer's.
Bob.
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Which computer & connecting cable etc can I use on Triac ?.

Post by Martin » Thu 11 Feb , 2010 17:53 pm

Take a look at the following links

viewtopic.php?f=54&t=728&hilit=ibm
viewtopic.php?f=34&t=1276&hilit=pnc3
Top
sopysnipe01
Posts: 16
Joined: Wed 10 Feb , 2010 15:45 pm

Re: Which computer & connecting cable etc can I use on Triac ?.

Post by sopysnipe01 » Fri 12 Feb , 2010 13:44 pm

Martin wrote:Take a look at the following links

viewtopic.php?f=54&t=728&hilit=ibm
viewtopic.php?f=34&t=1276&hilit=pnc3
Cheer's Martin
I have looked at these links but would prefer to acquire an original cable that is ready to use "any suggestions ?".
Top
Post Reply

Return to “Triac”