TRIAC VMC despatch date may 1998 what is it capable of? 3D?

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
beau-dry
Posts: 2
Joined: Thu 02 Aug , 2007 18:09 pm
Location: u.s

TRIAC VMC despatch date may 1998 what is it capable of? 3D?

Post by beau-dry » Mon 06 Aug , 2007 18:17 pm

I have recently acquired a Denford TRIAC VMC despatch date May 1998 ser EO5205 with Fanuc ver 2.1 software. I am curious what this machine is capable of doing in its current configuration, and also what mods I might need to do to bring the computer more up to date. Any help would be appreciated.
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Mon 06 Aug , 2007 23:15 pm

Take a look at our latest version of milling software.

viewtopic.php?t=116
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1451
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 07 Aug , 2007 0:06 am

viewtopic.php?t=116

We need to know the controller fitted in the machine to tell what you have.

Look at the link above and then let us know your control type.
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Tue 07 Aug , 2007 7:23 am

This Triac VMC was exported to the USA in 1998.

It originally was fitted with the Eurostep issue 5 controller, so will upgrade to VR Milling Ver 5 if no other mods have been carried out
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 07 Aug , 2007 9:54 am

It is capable of 2D profiling, drilling, pocketing and facing at the moment.

With a control card upgrade, you would be able to use any modern PC with a USB connection, and the machine would profile much faster and smoother in both 2D and 3D. The advantage of being able to use a new PC means you could run your 3D design software (CAD and CAM) on the same PC.

The Triac machine is one that benefits heavily from the latest control card - the velocity control improves stepper performance and is far less likely to loose position by stalling the motors.
Top
spacom
Posts: 3
Joined: Thu 20 Sep , 2007 21:19 pm

Triac VMC boot disks

Post by spacom » Fri 05 Oct , 2007 19:22 pm

Can any one help with supplying the boot discs for a triac VMC milling machine, I bought the machine from a colledge, and they gave me Nova mill, robot software.
Thanks
Les
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Mon 08 Oct , 2007 9:29 am

Try here:
https://website.denford.ltd.uk/support/9 ... s-software

You may also need to find DOS in order to make the disk bootable, there have been plenty of discussions (in this forum) on how to run DOS and RS232 reliably on a new (XP) PC
Top
Post Reply

Return to “Triac”