Wiring Triac Auxilary I/O

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
drb
Posts: 9
Joined: Sat 24 Feb , 2007 22:51 pm

Wiring Triac Auxilary I/O

Post by drb » Tue 14 Apr , 2009 0:29 am

What is the pin out for the auxillary I/O on the Triac VMC so that I can control other devices via the M-codes? I have the Triac with the tool changer.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 14 Apr , 2009 10:48 am

We've recently put some Triac electrical drawings into the downloads section.
HTH
Top
Post Reply

Return to “Triac”