1991 Denford Triac taper.

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
regnilham
Posts: 9
Joined: Mon 28 Jul , 2008 3:48 am
Location: Kentucky, USA

1991 Denford Triac taper.

Post by regnilham » Fri 17 Oct , 2008 15:43 pm

Can anyone tell me if the 1991 Triac with the tool changer is BT30 taper or if not what taper it is?
Thanks in advance,
Charles
Top
User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 221
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:
Contact Lone_Ranger

Re: 1991 Denford Triac taper.

Post by Lone_Ranger » Fri 17 Oct , 2008 16:03 pm

regnilham wrote:Can anyone tell me if the 1991 Triac with the tool changer is BT30 taper or if not what taper it is?
Thanks in advance,
Charles
Not 100% sure but I seem to remember that the 6 position ATC was BT35 and the 8 position ATC was BT30.

Regards
Rob

:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1451
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Fri 17 Oct , 2008 22:32 pm

The spindle taper is BT 30

The manual toolchanger is the easychange. (EC)
Top
regnilham
Posts: 9
Joined: Mon 28 Jul , 2008 3:48 am
Location: Kentucky, USA

1991 Triac taper.

Post by regnilham » Sat 18 Oct , 2008 16:25 pm

Thanks for the replys. I found a website that gives the taper dimensions and measured my one toolholder (came with the machine) and it appears that it is in fact BT35 taper. I can now order the proper toolholders.
Thanks again,
Charles
Top
Post Reply

Return to “Triac”