Triac Fanuc OM series with C++ ??

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
cafv
Posts: 1
Joined: Mon 13 Oct , 2008 16:28 pm

Triac Fanuc OM series with C++ ??

Post by cafv » Wed 15 Oct , 2008 2:14 am

Hello!

I am using a CNC machine of 3 axis, Triac Fanuc OM series for a school project.

Does anyone know's if has already been made any kind of off-line control using C++ ?? (or give some hints to search for)

Thanks
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Wed 15 Oct , 2008 8:45 am

There is an open source project called EMC, however its not a Fanuc emulator if thats what you are looking for ?
https://www.linuxcnc.org/
Top
Post Reply

Return to “Triac”