triac bt 35 atc problem

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
smyku
Posts: 1
Joined: Thu 04 Sep , 2025 9:29 am
Hardware/Software: denford triac bt35

triac bt 35 atc problem

Post by smyku » Thu 04 Sep , 2025 9:34 am

Hello, I apologize for my poor English. I recently bought a Denford Triac PC, a wonderful machine. I have a problem and I don't know how to start working. I suspect the tool changer isn't always rotating correctly. The problem is that I take tool 1 and want to change it to tool 3, but it takes tool 4. This is a random event. Does the sensor on the tool changer axis count the revolutions? How is it set?
Top
Post Reply

Return to “Triac”