TRIAC A.T.C. has no external VDU

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Charlie
Posts: 11
Joined: Mon 12 Feb , 2007 19:15 pm
Location: WIRRAL, UK

TRIAC A.T.C. has no external VDU

Post by Charlie » Mon 12 Feb , 2007 19:59 pm

I have a 1985 TRIAC A.T.C. , but no external VDU. Can anyone suggest a suitable replacement? or is it possible to use a computer VDU or a portable black & white TV? Any suggestions would be appreciated.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Mon 12 Feb , 2007 22:49 pm

Is this the one ?
viewtopic.php?t=535


Davidimurray was clearing out and he had one in probably better condition:
viewtopic.php?t=662
Top
Charlie
Posts: 11
Joined: Mon 12 Feb , 2007 19:15 pm
Location: WIRRAL, UK

VDU for TRIAC

Post by Charlie » Mon 12 Feb , 2007 23:21 pm

Yes, that looks like the type, but does it work?

Denford Admin wrote:Is this the one ?
viewtopic.php?t=535


Davidimurray was clearing out and he had one in probably better condition:
viewtopic.php?t=662
Top
Post Reply

Return to “Triac”