new to this site

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
mickgc29
Posts: 13
Joined: Mon 12 Sep , 2011 23:27 pm
Hardware/Software: Very New to all this
Location: Wakefield

new to this site

Post by mickgc29 » Mon 19 Sep , 2011 23:06 pm

Hi there new to this site

Just got a Denford Triac and the 12volt bulb is missing can any body tell what type the bulb is please

thank You
Mick
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: new to this site

Post by Martin » Mon 19 Sep , 2011 23:16 pm

12 Volt Halogen Bi-Pin Light Bulb, G4 Base
Top
mickgc29
Posts: 13
Joined: Mon 12 Sep , 2011 23:27 pm
Hardware/Software: Very New to all this
Location: Wakefield

Re: new to this site

Post by mickgc29 » Mon 19 Sep , 2011 23:23 pm

Thank You For that

Would this bulb Be OK https://www.ebay.co.uk/itm/20-x-G4-Bi-pi ... 2a128a54f7


Thank You Again
Mick
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: new to this site

Post by Martin » Tue 20 Sep , 2011 7:16 am

Yes it should fine.
Top
Post Reply

Return to “Triac”