STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANUAL

All info relating to the Denford StarTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
alastairseggie
Posts: 14
Joined: Tue 01 Sep , 2009 9:53 am

STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANUAL

Post by alastairseggie » Tue 01 Sep , 2009 23:34 pm

Hi All

Attached is the STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANUAL for a BBC Micro. It was OCRd from the original which I dont seem to have any more.

I have more drawings and information on the Eprom/dongle and software and will post that when I get the time.

Please feel free to contact me if you need assistance.

Regards
Alastair
Attachments
BBC STARTURN SW MANUAL .pdf
(408.73 KiB) Downloaded 1822 times

pernambuco
Posts: 1
Joined: Fri 16 Nov , 2012 2:06 am

Re: STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANU

Post by pernambuco » Fri 16 Nov , 2012 2:30 am

Hi Alastair,
I was given a Starturn PC, made in 1991, will the manual you have got any useful for this particular Lathe?
Thank you very much.
Pernambuco

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANU

Post by Denford Admin » Fri 16 Nov , 2012 14:41 pm

I think this post will contain relevant info on all Starturn's with the IBM PC:
http://denfordata.com/bb/viewtopic.php?f=46&t=3376

Post Reply