Hi All
Attached is the STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANUAL for a BBC Micro. It was OCRd from the original which I dont seem to have any more.
I have more drawings and information on the Eprom/dongle and software and will post that when I get the time.
Please feel free to contact me if you need assistance.
Regards
Alastair
STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANUAL
Moderators: Martin, Steve, Mr Magoo
-
alastairseggie
- Posts: 14
- Joined: Tue 01 Sep , 2009 9:53 am
STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANUAL
- Attachments
-
- BBC STARTURN SW MANUAL .pdf
- (408.73 KiB) Downloaded 2063 times
-
pernambuco
- Posts: 1
- Joined: Fri 16 Nov , 2012 2:06 am
Re: STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANU
Hi Alastair,
I was given a Starturn PC, made in 1991, will the manual you have got any useful for this particular Lathe?
Thank you very much.
Pernambuco
I was given a Starturn PC, made in 1991, will the manual you have got any useful for this particular Lathe?
Thank you very much.
Pernambuco
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: STARTURN BBC PROGRAMMING INSTRUCTIONS & MAINTENANCE MANU
I think this post will contain relevant info on all Starturn's with the IBM PC:
https://denfordata.com/bb/viewtopic.php?f=46&t=3376
https://denfordata.com/bb/viewtopic.php?f=46&t=3376