Starmill Specs

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
LucDav
Posts: 25
Joined: Wed 27 Sep , 2017 20:46 pm

Starmill Specs

Post by LucDav » Wed 27 Sep , 2017 20:56 pm

Struggling to find specifications or travel and spindle taper for what i believe is a 1995 Starmill i'm looking at purchasing.

Any information would be great
Attachments
IMG_20170919_162100431.jpg
IMG_20170919_162100431.jpg (715.68 KiB) Viewed 9381 times

DavidB
CNC Expert
CNC Expert
Posts: 174
Joined: Tue 19 Oct , 2010 16:06 pm
Hardware/Software: Triac, Orac

Re: Starmill Specs

Post by DavidB » Wed 27 Sep , 2017 22:08 pm

I've no idea about the travel but the spindle looks like the Coventry Toolholder quick change unit I have on my Triac.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Starmill Specs

Post by Martin » Wed 27 Sep , 2017 22:11 pm


DavidB
CNC Expert
CNC Expert
Posts: 174
Joined: Tue 19 Oct , 2010 16:06 pm
Hardware/Software: Triac, Orac

Re: Starmill Specs

Post by DavidB » Wed 27 Sep , 2017 22:14 pm

Regarding the travel have you looked in the Starmill section at the brochure as that gives travel and some details of spindle taper options depending on whether an ATC is fitted or not, looks like your may have an R8 to Coventry Toolholder quick change adaptor fitted.

LucDav
Posts: 25
Joined: Wed 27 Sep , 2017 20:46 pm

Re: Starmill Specs

Post by LucDav » Wed 27 Sep , 2017 23:16 pm

DavidB wrote:Regarding the travel have you looked in the Starmill section at the brochure as that gives travel and some details of spindle taper options depending on whether an ATC is fitted or not, looks like your may have an R8 to Coventry Toolholder quick change adaptor fitted.
I have looked in the brochure but this particular mill doesn't seem to look like the ones in it or hit the other specifications in the manual. The spindle on the machine is a 0.16KW unlike the others. It appears the spec is different for the non ATC model but no full spec.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Starmill Specs

Post by Martin » Thu 28 Sep , 2017 22:19 pm

The spindle motor & softwae limits will be the same on both the Starmill & Starmill ATC.


Spindle .2Kw
X 160mm
Y 90mm
Z 115mm

Not sure on the taper but I will have a look around.

Post Reply