Specification/Maunal for starmill

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Specification/Maunal for starmill

Post by andy_con » Sat 01 Jun , 2013 9:23 am

as title really, anyone got a manual with spec in for the starmill?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Specification/Maunal for starmill

Post by Denford Admin » Mon 03 Jun , 2013 11:56 am


andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Mon 03 Jun , 2013 17:00 pm

many thanks, that page didn't come up when I did a search.

ah bugger if no ATC then R8, so no retro fitting and ATC for me then :(

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Specification/Maunal for starmill

Post by Denford Admin » Mon 03 Jun , 2013 17:04 pm

No, I only just posted it up - scanned a lot of stuff a while back but haven't uploaded it all so it's worth asking!

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Mon 03 Jun , 2013 17:18 pm

ah well all info welcome

many thanks

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 12:37 pm

random quesion which im not sure if admin/denford can anwser, but the power drawbars used on novamills and starmill were they custom made by denford or off the shelf items?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Specification/Maunal for starmill

Post by Denford Admin » Thu 06 Jun , 2013 13:45 pm

We designed the mechanism (eg, springs and actuating lever) but bought in the air intensifier (From Parker.com I believe)

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 13:50 pm

such a shame you guys dont offer any kind of upgrades service for older machines, im gagging for an ATC on my starmill.

you dont happen to have a spare power drawbar in a shed out back somewhere do you lol (joking)

i will check out parker, many thanks

**update

would you have any parts numbers or anything from parkers?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Specification/Maunal for starmill

Post by Denford Admin » Thu 06 Jun , 2013 13:54 pm

VB489C :)

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 14:09 pm

awesome, thanks

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Thu 06 Jun , 2013 19:13 pm

does anyone know if this mod (raising column) will work on a starmill?

viewtopic.php?f=41&t=3585

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Specification/Maunal for starmill

Post by Denford Admin » Fri 07 Jun , 2013 9:13 am

As far as I know, they are the same castings...Part number RM 1/301
Attachments
RM1_301_V6.pdf
(147.41 KiB) Downloaded 794 times

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Specification/Maunal for starmill

Post by andy_con » Fri 07 Jun , 2013 12:34 pm

ok cool thanks, the only thing I note is the bar going through the head for the lid which would need to be redrilled

Post Reply