Starmill - ATC - Compressor

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Starmill - ATC - Compressor

Post by andy_con » Sun 18 Aug , 2013 18:16 pm

just looked in the starmill manual and it say if the air pressure drops before 90 B.P.I. the atc will stop working.

what is 90 bpi?

would this compressor run the atc?

https://www.ebay.co.uk/itm/241183-Silent ... 43be02c5d5
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Starmill - ATC - Compressor

Post by Martin » Mon 19 Aug , 2013 14:01 pm

I presume it should read psi?

90 psi = 6.21 Bar.

We used to set them to run between 80 to 100 psi so the compressor should be fine.
Top
andy_con
CNC Expert
CNC Expert
Posts: 190
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Starmill - ATC - Compressor

Post by andy_con » Mon 19 Aug , 2013 20:59 pm

oh right I see thanks
Top
Post Reply

Return to “StarMill”