Are there any instructions for cleaning the laser head above and beyond page 15 of the Guide?
Any instructions for Pro motor maintenance?
Router 2600 PRO - Laser Scan 3D / Motor
Moderators: Martin, Steve, Mr Magoo
The Pro Motor should not need any maintanance. Just keep it clean.
When clamping it in do not overtighten.
With Regard to the Laser Scanner just treat the lens like a pair of glasses.
Never rub it when there is dirt on it or you could scratch the surface.
Brush off with a soft brush and clean with an optical wipe or cloth.
Always refit the cover when not in use.
When clamping it in do not overtighten.
With Regard to the Laser Scanner just treat the lens like a pair of glasses.
Never rub it when there is dirt on it or you could scratch the surface.
Brush off with a soft brush and clean with an optical wipe or cloth.
Always refit the cover when not in use.