Tee slot dimensions

All info relating to the Denford Router 2600 and Pro CNC routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
JonHodgson
Posts: 2
Joined: Mon 09 May , 2022 14:51 pm

Tee slot dimensions

Post by JonHodgson » Wed 24 Aug , 2022 17:52 pm

Hi,

Due to a design error in the spoil board arrangement that someone before me came up with for our 2600, I need to replace it, so I am currently doing the design.

However, since the easiest way to create the new board will be to cut it on the top of the old one (it works well enough for that), I can't actually get at the original aluminium table to measure it accurately.

As far as I can tell it takes M8 tee nuts, and the slots are 40mm centre to centre, with them being places symmetrically in 430mm width of the bed.

Is that correct?

regards

Jon

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Tee slot dimensions

Post by Steve » Thu 01 Sep , 2022 15:44 pm

YES

Travel is 400mm in Y and slots are 40mm apart.

Post Reply