Orac tool turret on Mach

All info relating to the Denford ORAC CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
mikep
Posts: 6
Joined: Thu 25 Jan , 2007 16:15 pm
Location: oxford

Orac tool turret on Mach

Post by mikep » Thu 12 Mar , 2009 15:25 pm

A chap called maxporter posted a thread in July 08 regarding setting up an Orac turret to work with Mach, he offered to share his knowledge, as I am about to do the same I would appreciate a moderater emailing max if thats possable.
Thanks Mike
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Thu 12 Mar , 2009 15:52 pm

I have sent Max a copy.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Fri 13 Mar , 2009 9:55 am

Hi - if the information you need isn't on here, then please post it up (even if its a copy from the Mach forum, ie - if it is on there)...I'm sure it'll be a popular thread
Top
Post Reply

Return to “Orac”