Orac Fuses

All info relating to the Denford ORAC CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
markgreenslade
Posts: 6
Joined: Wed 02 Apr , 2008 17:13 pm
Location: Taunton, Somerset, UK

Orac Fuses

Post by markgreenslade » Sat 28 Feb , 2009 10:45 am

Hi,

Could someone please tell me the location of the main fuse in a Denford orac and how I access it.
Mine was working fine until yesterday when I pulled out the estop and everything suddenly stopped working. No fan, nothing displayed on the screen so I am hoping a fuse has just blown.

Thanks

Mark
Top
Martin
CNC Guru
CNC Guru
Posts: 1916
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Sat 28 Feb , 2009 18:07 pm

If you look in the back of the machine (2 x Button head screws) the main fuses are just to the left of the centre near where the door fan plugs in to the electrical unit.
Top
markgreenslade
Posts: 6
Joined: Wed 02 Apr , 2008 17:13 pm
Location: Taunton, Somerset, UK

Post by markgreenslade » Sun 01 Mar , 2009 10:58 am

Thanks for that. I changed the fuse without difficulty and the machine works again now.

Mark
Top
Post Reply

Return to “Orac”