hi
i have just bought an early 1984 syntelect control orac & i would like to buy some tapes so i can store the tool offsets & also a few programs until i can get the machine to talk to a computer
all the best
robert
07971 332245
email - r4robert.barker@gmail.com
orac tapes required
Moderators: Martin, Steve, Mr Magoo
orac tapes required
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: orac tapes required
Dictaphone tapes sometimes work:
https://www.ebay.co.uk/sch/i.html?_from= ... phone+tape
Also see this post:
viewtopic.php?t=199
https://www.ebay.co.uk/sch/i.html?_from= ... phone+tape
Also see this post:
viewtopic.php?t=199
Re: orac tapes required
thank you for your reply , i have had a look at the link you supplied for ebay & have bought a pack of 3 , hoping that theywill fit & work .
has anybody found a way to save the tool offsets without using the tapes ? i would prefer to save on to a computer now i have got the machine & a computer talking to each other .
robert
has anybody found a way to save the tool offsets without using the tapes ? i would prefer to save on to a computer now i have got the machine & a computer talking to each other .
robert
Denford Orac cnc Lathe
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer
Denford Easiturn Lathe with a Fagor 8020 TG control system also fitted with a biffaldi 6 station tool changer