I've been contacted by a collegue who has (on the back of seeing my machine) just aquired a run down 1999 Novamill, unfortunately its missing parts etc. It has been stripped of stepper motors and is missing other odd bits.
Having looked at the assembly drawings the stepper motor part number is BI 004221C but we cant find these online.
Not wisihing to open up my machine to look for an OEM part number (assuming the above is a denford number) is there an equivalent part number I can source, or what is the spec of the motor so we can look for an equivalent replacement.
Any help appreociated.
Cheers
Barry
Novamill Stepper motor
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Novamill Stepper motor
This could be it (no 004221 though) ?
BI00421C * STEPPER MOTOR * 103-770-1647
Which is SANYO 103-770-1647 DC 3,6V 1,4A
BI00421C * STEPPER MOTOR * 103-770-1647
Which is SANYO 103-770-1647 DC 3,6V 1,4A