Mirac KEB Inverter panel
Posted: Fri 01 Jan , 2021 18:23 pm
Hi All,
Does anyone (Denford included) have a display panel for the KEB inverter in the back of the Mirac (KEB 00.F4.010-2009 I think). I have most of the parts from an old Mirac (from a school, the toll head was dead).
I have the motors (spindle and steppers) and most of the electronics, so far I have resurrected a MicroMill and a MicroRouter and both are running now, but I would love to install a new spindle on the Microrouter, I have two of the KEB 07 f4 inverters from the Mirac, one will stay with the .75KW drive motor, the other is spare, if I can reconfigure it with the display I can use it with a new spindle.
I just need to borrow the display to edit the config
Thanks in advance
Stacey
Does anyone (Denford included) have a display panel for the KEB inverter in the back of the Mirac (KEB 00.F4.010-2009 I think). I have most of the parts from an old Mirac (from a school, the toll head was dead).
I have the motors (spindle and steppers) and most of the electronics, so far I have resurrected a MicroMill and a MicroRouter and both are running now, but I would love to install a new spindle on the Microrouter, I have two of the KEB 07 f4 inverters from the Mirac, one will stay with the .75KW drive motor, the other is spare, if I can reconfigure it with the display I can use it with a new spindle.
I just need to borrow the display to edit the config
Thanks in advance
Stacey