Denford Triac ATC Ser. # eo-3687 Data Sheets

All info relating to the Denford Mirac lathes

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
pfrancis
Posts: 6
Joined: Mon 22 Aug , 2011 16:56 pm
Hardware/Software: model: Triac ATC
Serial # EO 3687
Serial # of electronics: 3687

Fanuc o
Type: AO2b-0083-B503
NO: 16391 1987-05

Denford Triac ATC Ser. # eo-3687 Data Sheets

Post by pfrancis » Mon 19 Sep , 2011 16:29 pm

I am working with our local school to bring up a Denford Triac ATC with a Fanuc 0m control. WE currently have the control up and we have loaded the parameters. All the faults are reset and the control is stuck in MDI mode. There is no operator station for this machine and it appears that there never has been one. There are no soft keys on the screen to allow you to change modes or change screens. Fanuc suggested that we locate the Data sheets for this machine. Where can we get this information? Attached are pictures of this machine and the control
Attachments
IMG00046-20110914-1741.jpg
IMG00046-20110914-1741.jpg (85.04 KiB) Viewed 3949 times
IMG00037-20110914-1738.jpg
IMG00037-20110914-1738.jpg (93.99 KiB) Viewed 3949 times
IMG00036-20110914-1737.jpg
IMG00036-20110914-1737.jpg (87.13 KiB) Viewed 3949 times
IMG00035-20110914-1737.jpg
IMG00035-20110914-1737.jpg (111.26 KiB) Viewed 3949 times
Pete Franciskovich
Trainer/Mentor
Advanced Technologies Inc.
Cell: 309-253-8370
Work: 309-693-5923

User avatar
Denford Admin
Site Admin
Posts: 3600
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Denford Triac ATC Ser. # eo-3687 Data Sheets

Post by Denford Admin » Mon 19 Sep , 2011 17:01 pm

Have a look at parameter 908.7 (eg 1000 0000)

Bakes144
Posts: 11
Joined: Tue 13 Nov , 2012 9:02 am

Re: Denford Triac ATC Ser. # eo-3687 Data Sheets

Post by Bakes144 » Sun 25 Nov , 2012 12:49 pm

Apparently one of the 900 parameters would control the soft keys. They need to be entered before the other parameters. Does anyone have the parameters for triac fanuc OM 1990? Want to check that mine are right...

Thanks,

Paul

Post Reply