Dear all.
I have a problem with the CNC Turning Cylone P.
The turret tools post of that machine can not rotated (moved).
Please help me for troubleshooting that problem.
regards
Harun
Turret Tools can not rotated
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 2
- Joined: Fri 11 Dec , 2015 10:43 am
- Hardware/Software: CNC Turning Cyclone P
CNC Milling Triac
Re: Turret Tools can not rotated
What type of toolpost is it?
Does it try to rotate?
Has a circuit breaker tripped?
Does it try to rotate?
Has a circuit breaker tripped?
-
- Posts: 2
- Joined: Fri 11 Dec , 2015 10:43 am
- Hardware/Software: CNC Turning Cyclone P
CNC Milling Triac
Re: Turret Tools can not rotated
Hello Martin.Martin wrote:What type of toolpost is it?
Does it try to rotate?
Has a circuit breaker tripped?
Thank you for your attention.
The type of toolpost is Barrifaldi 8 station turret.
I have tried to rotate it through the change of tool (turret index) by pushing the button manually and also programming, but it still not rotate.
I don know whether a circuit breaker has tripped. But before the problem occurred, there was a slight collision between the turret (tool) and workpiece.
As additional information, the Led Lamp of tool post drive is not turn on.
Regards
Harun