versa laser saying doors open

General support, help and advice for Denford CNC machines (old and new)

Moderators: Martin, Steve, Mr Magoo

Post Reply
cbsomagh
Posts: 1
Joined: Tue 21 Oct , 2014 12:14 pm
Hardware/Software: Versa Laser. VLS 3.50

versa laser saying doors open

Post by cbsomagh » Mon 30 Mar , 2015 10:30 am

My versa laser is not working!!!!
Our laser cutter just stopped working last week and is giving the message that the interlocks are open and the red LED on the panel is flashing? Have checked the magnets on the lid, hinges.... everything ok. Obviously not getting the red dot from the laser either......
What else can I check?

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: versa laser saying doors open

Post by Martin » Mon 30 Mar , 2015 23:34 pm

Power.

You are missing the 48 volts. Check you have 240 volts on the kettle plug & the 2 fuses are OK in the fuse holder below the kettle plug socket.

Post Reply